A new flexibility distribution model for beam-column elements used in seismic analysis of steel frame buildings

Hamdy Abou-Elfath

Accuracy and metal removal analysis in orbital electrochemical hole sizing

Essam Soliman

Assessment of single frequency receivers in relative point positioning

 Hossam EL Habrouk and Ramadan Khalil

Effect of strain rate on mechanical properties of both cotton and cotton/Lycra yarns

Naglaa Mohamed and Rania El Deeb

Glass-crystal transformation of amorphous GexSb40-x Se60 films

El-Sayed M. Faraga and Ahmed Abo-Araisb

Power quality assessment of large industrial plant, case study and remedy suggestion

Amr Abou-Ghazala a, Talaat Abdel-Monem a and Fathy Baraka b

Prediction of a new object location in a case of splitting the data set

Nasser A. M. Barakat, Taha E. Farrage, Reda. A. Abu Beah and Emad A. Mahmoud

Removal of chelated cupric ions from industrial effluents by cementation on zinc using a rotating cylinder batch reactor

Taghreed M. Zewail

Removal of some commercial dyes from their aqueous solutions and wastewater by using Fenton’s reaction

M.F. El – Sherbiny a, F.K. M. Wali b and M.M. Halwany b

Sea level rise impacts on Egyptian Mediterranean coast (case study of Alexandria)

 Akram M. Soliman a, Hossam M. Moghazy b and Amr M. El-Tahan a

Seismic strengthening of existing reinforced concrete buildings by providing shear walls

 Mohie El-Din Salah Shoukry, Tarek I. Ebeido, Gehad Ez El-Din Rashad and Sanaa Mohamed Abd El-Reheim

Thermal effects in rotating labyrinth seals

E. Saber and H. A. El-Gamal